6x47 lapua

Got Tech. info, loads, tips, trouble shooting, here is the spot

Moderators: Coyotehunter, Prairie Ghost

Post Reply
User avatar
wildturkey
coyotehunter
Posts: 11
Joined: Sat Jan 09, 2010 9:03 am

6x47 lapua

Post by wildturkey »

I am get a new rifle built at this time on a 700 rem action 6x47 lapua 1&8 twist hope to shoot bullets 80 to 105 grain for long distance coyote hunting will be open for any info or load data at this time thank you wildturkey.http://www.coyotehunter.net/forums/post ... =post&f=14#
User avatar
Tim Anderson
coyotehunter
Posts: 1275
Joined: Mon Mar 12, 2007 11:48 am
Location: Minn

Re: 6x47 lapua

Post by Tim Anderson »

Congrats on the new build.
I'm haveing a custom built also useing the same case but i'm going with the 20x47 Lapua.
I can't help on any load info but if you do some searchs you may come up with what you are looking for...
User avatar
wildturkey
coyotehunter
Posts: 11
Joined: Sat Jan 09, 2010 9:03 am

Re: 6x47 lapua

Post by wildturkey »

i have a 22x47 on a bat action an kierger barrel stan ware down in westbrook mn did the smithing on the rifle shoots great 4000fps with a 55 grain bullet. let me know some of the speed you get out of that 20x47 it should be a real speedster & flat shooting i had a 20 br an i am sorry i sold it. it was fast an accurate.
User avatar
Tim Anderson
coyotehunter
Posts: 1275
Joined: Mon Mar 12, 2007 11:48 am
Location: Minn

Re: 6x47 lapua

Post by Tim Anderson »

I'm just down the road from Stan, he builds most of my rifles..
I'll be going with a 20 cal. 50 and 55 gr.. The 50 should make it to 4000 fps and the 55 will make it to 3900.. Both bullets are on the long side but they are not VLD bullets, but darn close to it with a great B.C. The 20x47 is doing very well in the 600 yd. comp. shoots...
User avatar
Dcoy
Top Dog
Posts: 1156
Joined: Sun Feb 10, 2008 7:33 am
Location: SD

Re: 6x47 lapua

Post by Dcoy »

Nice stuff guys.A 220 improved with efficiency to boot. :D I'm jealous.
User avatar
wildturkey
coyotehunter
Posts: 11
Joined: Sat Jan 09, 2010 9:03 am

Re: 6x47 lapua

Post by wildturkey »

Tim i live in ramsey mn i which i lived closer to stan down in west brook do you have to buy your custom 55 grain bullets or does berger make a 55 in the 20 cal now. they only had a 50 grainer when i had my 20 br
User avatar
Tim Anderson
coyotehunter
Posts: 1275
Joined: Mon Mar 12, 2007 11:48 am
Location: Minn

Re: 6x47 lapua

Post by Tim Anderson »

You can get them from Berger, not sure if the 50 is a new bullet or one that has been around.. The 55 is a new bullet that is a little longer, its not a VLD but close..I think the same apply's to the 50 if it is a new bullet... I talked to the woodchuck den owner the other day and he said he will also be comeing out with some bullets for the 20x47...
User avatar
xdeano
coyotehunter
Posts: 375
Joined: Fri Sep 19, 2008 7:13 pm
Location: North Dakota

Re: 6x47 lapua

Post by xdeano »

what's the proposed barrel life of that 6x47L? around 3K or so? any thoughts about pushing any of the 115g bullets, it'll give you a bit higher bc. I know a few guys out here that are shooting match with the 6x47L.

xdeano
“It’s better to live one day as a lion, than a thousand years as a lamb.” -Mussolini
User avatar
wildturkey
coyotehunter
Posts: 11
Joined: Sat Jan 09, 2010 9:03 am

Re: 6x47 lapua

Post by wildturkey »

i would guest you are close about 3k down the pipe. you know its alot on how hot you load them. I have a 1&8 twist barrel which i think is a good all a round twist, i know guys that have shot 55 grain bullets very well out of their 223 & 243 cal rifles with 1&8 twist. i don't think i will be able to shoot the 115 from what i have read but i would need a 7.5 twist or faster. but you never know i will try.them barrels vary a little you know.
Post Reply