Removing Moly Coating

Got Tech. info, loads, tips, trouble shooting, here is the spot

Moderators: Coyotehunter, Prairie Ghost

User avatar
LeviM
coyotehunter
Posts: 2375
Joined: Sun Dec 03, 2006 8:26 am
Location: ND

Re: Removing Moly Coating

Post by LeviM »

xdeano wrote:Well, I guess they don't make the product any longer. Sorry man. It was a good product.
xdeano
Thanks for the info though
Levi McNally
"Coyote Fever"
'Whack em' and Stack em' ND Style"
"Speak the Language"
User avatar
xdeano
coyotehunter
Posts: 375
Joined: Fri Sep 19, 2008 7:13 pm
Location: North Dakota

Re: Removing Moly Coating

Post by xdeano »

i forgot to mention JB bore paste. That works pretty decent too.

xdeano
“It’s better to live one day as a lion, than a thousand years as a lamb.” -Mussolini
User avatar
LeviM
coyotehunter
Posts: 2375
Joined: Sun Dec 03, 2006 8:26 am
Location: ND

Re: Removing Moly Coating

Post by LeviM »

I first want to thank everyone for their tips!!! I went with Jeff's advice and tried some Witches Brew! That stuff is nasty. It did a really good job, it pretty much boiled that crap out. I warn anyone, removing moly is a messy, messy, messy job! :x I plan on buying a cheap box of bullets firing them through and going back through with some more witches brew to make sure its all out before testing any of my reloads. Thank again guys!!

Side Note: Witches Brew, sounds like the crap I drank in college!!! :)
Levi McNally
"Coyote Fever"
'Whack em' and Stack em' ND Style"
"Speak the Language"
User avatar
Dcoy
Top Dog
Posts: 1156
Joined: Sun Feb 10, 2008 7:33 am
Location: SD

Re: Removing Moly Coating

Post by Dcoy »

Orange vodka and milk works also if you're talking young and foolish. :D
User avatar
LeviM
coyotehunter
Posts: 2375
Joined: Sun Dec 03, 2006 8:26 am
Location: ND

Re: Removing Moly Coating

Post by LeviM »

LMFAO :lol:

That sounds kind of good though, and thats pretty much what witches brew looks like!!!!
Levi McNally
"Coyote Fever"
'Whack em' and Stack em' ND Style"
"Speak the Language"
User avatar
Prairie Ghost
Site Admin
Posts: 2272
Joined: Tue Oct 03, 2006 7:38 pm
Location: On the line

Re: Removing Moly Coating

Post by Prairie Ghost »

Dcoy i thought it was all "moonshine" in your days LOLOL :shock:
Money is a great servant but a terrible master!!
User avatar
Dcoy
Top Dog
Posts: 1156
Joined: Sun Feb 10, 2008 7:33 am
Location: SD

Re: Removing Moly Coating

Post by Dcoy »

Yeh a little of that around.The meth of my era though was 'Everclear'.Anyone remember that stuff?Fill half a 7-Up bottle with that and go nuts for 24 hours. :D Had to be careful with matches around it.
Got a buddy that still thinks its the stuff that powered man to the moon.Of course he thinks he's there most of the time anyway.
User avatar
Prairie Ghost
Site Admin
Posts: 2272
Joined: Tue Oct 03, 2006 7:38 pm
Location: On the line

Re: Removing Moly Coating

Post by Prairie Ghost »

that stuff should be banned............No SERIOUSLY that stuff should be banned thats just trouble in a bottle
Money is a great servant but a terrible master!!
User avatar
Coyotehunter
Site Admin
Posts: 3387
Joined: Sat Jul 01, 2006 10:57 am
Location: Wyoming

Re: Removing Moly Coating

Post by Coyotehunter »

"GM Top Engine" cleaner and a new brush.
Coyotes Forever
User avatar
jaybic
coyotehunter
Posts: 292
Joined: Tue Sep 16, 2008 9:11 am
Location: Rochester, MN(way too far east!!!!)

Re: Removing Moly Coating

Post by jaybic »

For removing moly, I have had best luck with Sweets 7.62 and if needed JB borepaste/bore bright. Just dont go sniffing the Sweets bottle and be sure to use a nylon brush. You put Sweets on a .22 cal copper/brass brush and it'll be a .17 cal brush by the time your done cleaning. NOT KIDDING!

Dcoy, you can still buy Everclear down here in MN. I dont know if it removes copper from a rifle barrel but it does a great job of removing any intelligence you might have, function to your liver, motor skills, judgement and does equally well removing stomach contents towards the end of an evening and best of all, only takes about 3 shots to do it.

Those of you who have tried know what I mean.

Jaybic
User avatar
Dcoy
Top Dog
Posts: 1156
Joined: Sun Feb 10, 2008 7:33 am
Location: SD

Re: Removing Moly Coating

Post by Dcoy »

Jaybic,
Didn't know the 'stuff' was still around.Scary.Explains a lot-the way a few buddies from there act,Mn politics,etc.I know my early use undoubtedly contributed to my ongoing state of confusion.
As to using it on Moly,I don't know either but I'd be more afraid for the barrel itself. :D
Post Reply