looks interesting

[bucksnbears]

http://www.greybullprecision.com/index. ... 5&Itemid=5

[lyonch]

Personally i am not a fan of MOA adjustments when in the field. I prefer my knob to be in yards, so i dont have to over think everything

[bucksnbears]

i'm with you!!. i still use a standard x-hair. that was a hell of a shot though

[jaybic]

That does look interesting for sure. I have that same scope on my rifle now but it only has the 40mm objective and it has the varmint hunter reticle. I wonder if mine could be modified? I will have to check into that(kinda gullible that way I guess).

Jaybic

[devildogg]

go to kenton industries.com and check out their knobs for leupold scopes vxIII or vxII you call them give them all the information on your load your gun muzzel velocity temp and altitude they will make it for you no sending your scope off no screwing around just pop the plastic cap off the elevation (on vxIII) knob and screw it on and your good out to about 600-650 yds. very simple all in yards no thinking just range em and dial it in. mine is in 25 yrd increments.

[Daryl]

Leupold custom shop will do the same thing for $90. Give them the load info and they will build you a turret in yds . That guy on grey bull precision is the original shooter for the best of the west.

[LeviM]

I am having one built for my leupold scope as we speak, and day I should have it on my door step

[bucksnbears]

I am having one built for my leupold scope as we speak, and day I should have it on my door step

ya think it's gonna help

[LeviM]

wont hurt!

[xdeano]

I like MOA, it's just as quick as the Bull system. It's not the elevation that's going to get a person it's the damn wind. Anyone can adjust for elevation once they figure out what their drop is. That's kind of like the BORS system made for scopes, sure it'll take in your ballistics and atmospherical data and give you a drop, but no wind.

The problem I have with the Bull turrets is that you can give him your velocity and bc of your bullet you intend on using, but they don't take into effect of weather changes such as Temperature. Some may know what the difference in temperature on powder and velocty, some powders can be pretty drastic. Another out be altitude, you change altitude and you're all out of wack with the Bull system.

There are a lot of things that can't be controlled. SO if you guys are thinking about the Bull system, i'd think long and hard.
It looks nifty, but...is it?

If you're looking for a good scope I have a Leupold Mark 4 4.5-14x50mm for sale.

xdeano

[Tim Anderson]

I use the Kenton BDC dials on two of my scopes which are the same as the system mentioned above. If I remember correctly I think I paid 40.00 per dial. I've tested mine out to 800 yds and it puts the bullet where it should and even with a temp change its still close enough to hit a coyote. For guessing wind drift i've always just used the coyotes body for hold... I also have a Leupold scope with the var. reticle I can't get it to work with my High vel cartridges as far as bullet drop goes but the windage marks it has seem to be pretty reliable so I may have 1 or 2 kenton dials made up for windage..

[Pilgrim]

My .204's scope is a Weaver V16 w/ fine crosshair. The reticle is simply two very fine intersecting lines.

I'm about to send the scope to TK LEE (see photo example) to have a pair of custom mil-dots added (on horizontal line) that will enable me to bracket a 32" object at 400 yards (adult coyote is 32" long, 32" tall). That way I know instantly whether a coyote is within or beyond 400 yards.

[Coyotehunter]

where are you finding 32" tall coyotes?

[Dcoy]

I think it's a feature available on weaver scopes.You can order them in sizes up to 60 inches-in case you want really big pelts.

[Pilgrim]

CH_

Standing with head up (height) toes to eartips, broadside length from nose to rear (exclude tail).

coyote32pic.jpg (5.49 KiB) Viewed 15128 times